Little Dot MK II Tube Headphone Amplifier / Pre-amplifier

Current production Little Dot models and pricing

Moderator: sword_yang

Post Reply
User avatar
sword_yang
Posts: 83
Joined: Apr 19th, '05, 22:26
Location: CHINA
Contact:

Little Dot MK II Tube Headphone Amplifier / Pre-amplifier

Post by sword_yang »

Little Dot MK II is a SEPP (single-ended push pull) OTL Class-A amplifier, it has good sound quality, dynamic range and low distortion. It's also provides gain control of 3, 5, and 10 via internal DIP switches for fine-tuning so you can maximize synergy with almost any headphone you have, whether it be 32 ohms or 600! It's also gives user to enjoy tube-rolling, you can stick with the original 6JI, or you could swap with WE403A/B, GE5654, M8100, CV4010, EF95, and etc. At its factory jumper setting, and with jumper pins shorted, EF92, CV131, and all equivalents and drop-in replacements!
Review:
Review of Little Dot MKII: Little Dot MK II Review @ Head-Fi
Image

Image

Image

Image

Image

Image

Image
Technical Specifications
  • SEPP (Singled-ended Push Pull) OTL in Class-A
  • Input: Gold-Plated Unbalanced Phono (RCA) Jacks
  • Output: 1/4″ Gold-Plated Stereo Headphone out
  • Driver Tubes: 6JI
  • Power Tubes: 6N6
  • Frequency Response: 20HZ – 50KHz (-1dB)
  • THD+N: 0.1% (50mW into 300 ohms)
  • Suitable Headphone Impedance: 32 – 600 ohms
  • Input Impedance: 50K ohms
  • Pre-Amplifier Output Impedance: 600 ohms
  • Pre-Amplifier Gain: 3-10x (also controlled via gain switches)
  • Pre-Amplifier Voltage: 10V RMS



Post Reply