MK2 V3.0 Uneven volume in channels.

Talk all about Little Dot products!

Moderator: sword_yang

Post Reply
DRKreiger
Posts: 1
Joined: Feb 10th, '18, 22:50

MK2 V3.0 Uneven volume in channels.

Post by DRKreiger »

I have an LD MK2, with V3.0 board.

The issue i am having is the volumes is very uneven left to right at lower volumes.

Furthermore, I have a some random spots around 40% or so where distortion rears it's ugly head. But if i push past that it goes away.
Is this an inexpensive POT active up?

What is a good upgrade for the factory one?

TIA

capetownwatches
Posts: 3
Joined: Jan 24th, '18, 01:24

Re: MK2 V3.0 Uneven volume in channels.

Post by capetownwatches »

It may be inexpensive but it is good quality - try some switch cleaner directly into the pot.
ALPS-27 would be the next step up - it should fit (just) into the MKll chassis.
If not there are plenty others available.

User avatar
sword_yang
Posts: 83
Joined: Apr 19th, '05, 22:26
Location: CHINA
Contact:

Re: MK2 V3.0 Uneven volume in channels.

Post by sword_yang »

capetownwatches, thanks for your advice,
Drkreiger, the model: ALPS 16 (A100K), it suitable with MK2.

Post Reply