how to open Little Dot II

Talk all about Little Dot products!

Moderator: sword_yang

Post Reply
zeglarz5
Posts: 1
Joined: Sep 30th, '17, 04:03

how to open Little Dot II

Post by zeglarz5 »

Hi.

I have a problem to open LD II.
Which screws I need to remove to open the cabinet to change gain settings ?
I can't open face plate because volume knob.
I don't want to force it.
Rear plate possible to remove but can't reach the switches.

Please help. :)

Krzysztof

User avatar
rockage
Posts: 275
Joined: Apr 10th, '05, 06:29

Re: how to open Little Dot II

Post by rockage »

You'll need to remove the front and rear panels via the 4 screws for each. The chassis will then part in the middle. I hope this helps!

DinaHaines
Posts: 1
Joined: Jan 30th, '18, 18:59

Re: how to open Little Dot II

Post by DinaHaines »

I had the same issue to open my little dot. I have tried your solution and it helped me to open thit easily. Thank you so much for your help. I have some more doubts.

capetownwatches
Posts: 3
Joined: Jan 24th, '18, 01:24

Re: how to open Little Dot II

Post by capetownwatches »

rockage wrote:
Oct 5th, '17, 17:33
You'll need to remove the front and rear panels via the 4 screws for each. The chassis will then part in the middle. I hope this helps!
This is incorrect, and I find it strange coming from a Moderator?

In order to access the gain switches, ONLY the BOTTOM two screws front and back need to be removed.
In other words, a total of 4 screws (NOT ALL 8) need to be removed.

The bottom half of the chassis will then separate.

The front and back plates themselves do NOT need to be removed!

Post Reply